Author Topic: How to Root S7 & S7 Edge SM-G930P & SM-G935P PC5 to PG1 (6.0.1) for Global GSM  (Read 14938 times)

Offline idone

  • Administrator
  • Full Member
  • *****
  • Posts: 105
    • View Profile
DISCLAMER: Rooting the device will void the phone warranty, by following these steps you accepting it.

If your phone is on a lower Software Version than PD3 then [url=]proceed to unlock directly WITHOUT ROOT
(Read this topic if you don't know how to read the Software Version).

1.) Power off the phone completely, now hold Home and Volume-(down), keep them pressed and power the phone on.
2.) Press Volume+(up) when prompted to enter "Downloading Mode"
3.) Connect USB and wait for all drivers to finish installing on PC.
4.) Download SM-G930x_Engineering_BOOT.tar.md5 or SM-G935x_Engineering_BOOT.tar.md5 (choose correct file for S7 or S7 Edge).
5.) Open Odin3 (Run as administrator), then select the above file in "AP" slot, then pust START on Odin3, the file will be flashed.
6.) Download Root for S7/S7 Edge and unzip it.
7.) Go to Settings>About Device> and tap "Build Number" 7 times to enable "Developer Menu",
      then enable "USB Debugging" and "OEM unlock" in the Developer Menu. Connect USB and more drivers may install.
8.) Double click "Root_S7.bat that is inside Root_S7 folder that you extracted on your PC, you should see a "Done!" message at the end of the command window (if not then close the windows and relaunch the bat), after that the phone will reboot automatically and it will be rooted.
9.) Proceed to unlocking, debranding, MSL read, Hotspot/Tethering etc. etc... Click for Instructions

NOTE: If you have no DATA/MMS after rooting/unlocking (AND YOU HAVE CHECKED YOUR APN) reset Network Settings as shown below.

Odin3_v3.12 for Windows Click to Download
Samsung USB Drivers Click to Download
Root_S7 for S7/S7 Edge Click to Download

*Engineering Bootloaders:*
S7: SM-G930x_Engineering_BOOT.tar.md5 Click to Download
S7 Edge: SM-G935x_Engineering_BOOT.tar.md5 Click to Download
« Last Edit: April 01, 2017, 04:18:15 AM by Nodial »

Offline Nodial

  • Administrator
  • Hero Member
  • *****
  • Posts: 829
    • View Profile
    • idone.apps
Please use the above instructions if your rom is: PC5, PD3, PE1, PF2 or PG1 (6.0.1 roms)

Else if the rom is PH7, PJ2 or PK1 (newer 6.0.1 roms) use the other specific thread here:
« Last Edit: January 17, 2017, 08:52:33 AM by Nodial »
See you ;-)