Author Topic: How to SIM Unlock Sprint/Boost S10e/S10/S10+/S10+ 5G, Note10/10+/10+ 5G  (Read 621 times)

Offline idone

  • Administrator
  • Full Member
  • *****
  • Posts: 106
    • View Profile
How to SIM Unlock S10e, S10, S10+, S10+ 5G, Note 10, Note 10+, Note 10+ 5G from Sprint, Boost Mobile, Virgin Mobile or Credo Mobile

Please check your device Android version: Our app doesn't work on Android 10 yet, and on Note 10/10+ it only works on BIT1 ROMS. (you can update after the unlock though).

On S10 the unlock works on BIT2 updated devices too (as long as Android version is 9

If you need to unlock a Note 10 please check the BIT number, in Settings > About phone > Software information:

1.) Download and install our unlock app.

2.) Purchase the unlock from within the app.

3.) Enable Developer options from Settings > About phone > Software information > tap "Build number" 5 times  to enable "Developer Menu",
      then enable "USB Debugging" in the Developer Menu.

4.) Connect the phone to the PC using an USB cable and wait for all drivers to finish installing.

5.) If you never connected your phone to your PC in debug mode you will be asked to allow USB debugging, please allow it by checking the "Always allow from this computer" checkbox and tap on "OK".

6.) Browse into the phone internal root folder and copy the IMEI.unlock (IMEI=The IMEI number of your phone) file to somewhere on your computer (Desktop is fine).

7.) Download and run Reseller Tools (Password of the archive: Be sure the phone is still connected to the PC.

8.) Click on "..." button near the "Select Customers "IMEI.unlock" file..." text and browse for the above copied IMEI.unlock file.

9.) Select the IMEI of the device to be unlock from the "Approved IMEI's" section of ResellerTools (see pic).

10.) Press "Unlock Sprint Note10/10+ button and device will be Permanently Unlocked! (please wait approx 1-2 minutes for unlock to complete, !!!watch your phones screen!!! to "always allow" USB Debugging when prompted!!!.

Samsung USB Drivers Click to Download
ResellerTools_Updater Click to Download Password (if needed)

*ResellerTools Dependencies:*
.NET Framework 4.0 Click to Download
Microsoft Visual C++ 2015-2017-2019 Redistributable Package (x86) Click to Download
« Last Edit: January 15, 2020, 01:39:36 PM by Nodial »

Offline Nodial

  • Administrator
  • Hero Member
  • *****
  • Posts: 854
    • View Profile
    • idone.apps
NOTE: If you're getting the following error while running Reseller Tools:

It happens because the computer misses the Microsoft Visual C++ 2015-2017-2019 Redistributable Package, please download and install it, the link is at the bottom of the instructions post.
« Last Edit: January 05, 2020, 05:59:54 PM by Nodial »
See you ;-)