idoneapps

Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Messages - idone

Pages: [1] 2 3 ... 7
1
I've a G935P QJ3 ROM with COMBI ROM. I installed the idoneapps APK but when I press Purchase I get "Unfortunately, idoneapps.com has stopped". I tried several times and same problem. I can't purchase the unlock

Hi Enrique, Combo rom misses internet app, please flash stock rom and then purchase, then you may reflash combo rom. In our steps here we have also put to purchase before flashing.

After you flash combo rom our app may tell you "Token Changed", if so select "Send Log" from the apps menu, or just copy "unlock.log" from the phones internal storage/sdcard and send it to us, we'll update your token right away!

Thanks.

2
This procedure won't root your phone, it will allow you to unlock it using a COMBINATION ROM and our app.

This procedure WILL factory reset your phone. Backup with SmartSwitch to save any data/pictures/videos.



1.) Download and install our unlock app.

2.) Purchase the unlock from within the app.

3.) Download COMBINATION_FA60_G935PVPU5AQK1 and also G935P_stock from below.

4.) Connect the phone to the PC using an USB cable and wait for all drivers to finish installing.

5.) Power off your phone completely, then hold HOME and Volume+ buttons while powering on to get into recovery menu, wait a moment for the menu to appear then select "Wipe data/factory reset" after it completes select "Reboot to bootloader" unzip COMBINATION_FA60_G935PVPU5AQK1zip then in odin select the tar.md5 in the AP slot and flash it.







6.) Download then unzip COMBO_ROM_unlock_installer.zip from below.

7.) Copy the unlock.apk downloaded on point 1 into the COMBO_ROM_unlock_installer folder.

8.) Double click on install.bat from the above extracted files.







9.) Open the apps, then open settings>Wi-Fi tap the "3 dots" and select "Add network" Connect to a working WiFi network on the phone.







10.) Open idoneapps unlock app and proceed to unlock the phone.

11.) When requested select "Unlock as SPRINT".







12.) Phone is now UNLOCKED, now flash the Stock ROM linked below and you are done (all 4 files)







*Prerequisites*
S7 Edge Stock ROM QJ3 Click to Download
COMBINATION_FA60_G935PVPU5AQK1.zip Click to Download
Odin3_v3.14(skip SHA256) for Windows Click to Download
COMBO_ROM_unlock_installer.zip Click to Download
Samsung USB Drivers Click to Download
Password (if needed)=idoneapps.com

3
This procedure won't root your phone, it will allow you to unlock it using a COMBINATION ROM and our app.

This procedure WILL factory reset your phone. Backup with SmartSwitch to save any data/pictures/videos.



1.) Download and install our unlock app.

2.) Purchase the unlock from within the app.

3.) Download COMBINATION_FA60_G930PVPU5AQI1 and also G930P_stock from below.

4.) Connect the phone to the PC using an USB cable and wait for all drivers to finish installing.

5.) Power off your phone completely, then hold HOME and Volume+ buttons while powering on to get into recovery menu, wait a moment for the menu to appear then select "Wipe data/factory reset" after it completes select "Reboot to bootloader" unzip COMBINATION_FA60_G930PVPU5AQI1.zip then in odin select the tar.md5 in the AP slot and flash it.







6.) Download then unzip COMBO_ROM_unlock_installer.zip from below.

7.) Copy the unlock.apk downloaded on point 1 into the COMBO_ROM_unlock_installer folder.

8.) Double click on install.bat from the above extracted files.







9.) Open the apps, then open settings>Wi-Fi tap the "3 dots" and select "Add network" Connect to a working WiFi network on the phone.







10.) Open idoneapps unlock app and proceed to unlock the phone.

11.) When requested select "Unlock as SPRINT".







12.) Phone is now UNLOCKED, now flash the Stock ROM linked below and you are done (all 4 files)







*Prerequisites*
S7 Stock ROM QJ3 Click to Download
COMBINATION_FA60_G930PVPU5AQI1.zip Click to Download
Odin3_v3.14(skip SHA256) for Windows Click to Download
COMBO_ROM_unlock_installer.zip Click to Download
Samsung USB Drivers Click to Download
Password (if needed)=idoneapps.com

4
This doesn't flash anything to the recovery partition, only flashes bootloader.

5
Stock tar.md5's / Re: How to flash a stock official binary tar.md5 file.
« on: August 13, 2017, 10:55:48 AM »
hello i was trying to flash a s7 to stock rom but i got a failed and it did not let me. attached is a screenshot please help. my phone has weird spacing between numbers when someone calls and i have a update pending notification that i cant get rid of. any help would be appreciated. Thank you

Hi, please make sure you are flashing same or newer Software Version, it failed trying to downgrade.

Let us know if you have any issue.

6
I rooted my G930P QAA and unlocked it using idoneapps.
However, calling, messaging, and LTE of my G930P are not work.
My carrier is LGU+ (CDMA) in South Korea.
I attached a screen shot.
What can I do to solve the problem?

Hi!

I do see you have signal that shows "R" for roaming. So it does appear registered on your network.
Since your provider is a CDMA one call to check with the Provider/Carrier to see if they need the devices MEID to add to their "Whitelist" if they use one.

Also please check your Roaming settings under Mobile Network settings to be sure you have Roaming allowed.
The third thing to check is your APN, please be sure it matches the details your Provider uses.

Let us know how it goes!
Thanks


7
Does our unlock app show that you are rooted?


8
Post reserved for updates.

9
Post reserved for updates.

10
Haven't tried the methods for data restoring , is this root working for PL6? or is it possible to downgrade to PK1?

PL6 can be downgraded to PK1. I would suggest a factory reset from recovery menu immediately after flashing it.

Root the current files in this thread may work fine to root PL6 though, if you try let us know, flashing stock can fix any issue caused by the rooting attempt ;)


11
Ok, I suggest that you backup any data you want to save (via Samsung SmartSwitch, etc.)  Then do a factory reset. Install our app and open it once. Now make sure "OEM Unlock" and "USB Debugging" are enabled. Copy the Root_S7 folder to your phones storage and run the root.bat once just so you may get the "Accept USB Debugging" prompt on your phone. Check the ALWAYS Allow/Accept, now your phone should reboot from the root.bat.

Now power it off and into download mode, or if you are fast when it begins to reboot from above hold the Home and Volume-(down) button and it will boot right into download mode.

Flash the Engineering Bootloader, then right away run the root.bat again.
Hopefully all will be successful, if SuperSU app says "su binary needs update" and then fails run the root.bat again as some files just failed to copy.

Let us know.

12
In need of help. Im on PK1 trying to root, i get up to step 8, I flashed the file then the phone restarts normal but as soon as i enter the pin the phone goes into the bootloader screen and stays there until the battery dies. What am i doing wrong?

Your phone is rebooting to Download Mode as soon as you enter your PIN after flashing the Engineering bootloader?

You can reboot out of Download Mode by holding the Volume-(down) and Power button for approx 10 seconds.
If it still reboots to Download Mode again after that reflash PK1 Stock tar.md5 and remove your lock screen in Security settings on your device and try to root again.

Let us know if you have any issue.
Thanks.

13
Q&A Troubleshooting / *FIX* S7/S7 Edge "NO Data/MMS" after root/unlock!
« on: January 22, 2017, 07:16:40 PM »
NOTE: If your S7/S7 Edge has no DATA/MMS after rooting/unlocking (AND YOU HAVE CHECKED YOUR APN) reset Network Settings as shown below.


14
Transfer Data/Content/Messages from an other BRAND to a SAMSUNG device.

Download Smart Switch Mobile and install it on the device you would like to get content from. You may transfer by USB Cable or WiFi.

Download and learn more HERE

15
Thanks @ Big_A74!! We have implemented a fix that happens automatically for this issue if a Cricket/AT&T sim is inserted :)

@Youdoofus what provider are you using? If the issue is affecting more than Cricket/AT&T we can add it for the others as well.

Let us know.
Thanks

Pages: [1] 2 3 ... 7